You can use the mouse for everything.

The menu control can also be activated by means of the Alt key and the control letter for the menu option (after pressing the Alt key, it is normally visible in a different color). Some important menu options can be activated by means of the F keys.

Here is a survey of all control keys:

Run Rale Design Software for small transformers

After installation of the Rale Design Software, you see the Rale Design Software program group on-screen.

Click on the Small Transformers bottom

After clicking on the Small Transformers bottom,the main menu for the Small Transformesr Program will appear on-screen.

Click on the icon Small Transformers or press Enter.

This is followed by the input mask on screen with your input data

Input mask

(Numerical Characters =>Inputting), (Arrow, PgUp, PgDn, Mouse =>Move)

Your last input file will be loaded into the input mask. Here, you can create your input or incorporate the input data from an input data file and thus achieve drastic acceleration in the procedure for filling-in of the input mask.

(TAB=>Steps), (Click=>Marks), (Double click=>Selects)

In the installation of the Rale Design Software, a RALE library of input data files has also been installed..

Input

The input mask consists of 5 areas:

1. Menu bar.
2. Input form for primary data.
3. Input form for secondary data.
4. Input form for general technological parameters.
5. Status line

The 6 fields of the status line indicate, in sequence, the core family, the core, the iron quality family,iron quality, and the minimum and maximum values of the current input. The input process for primary voltages and the secondary windings is concluded by means of the PgUp or PgDn keys

On-line Help

Key F1 plays an important part at this point, because each input field has a help text. Use ESC to quit on-line help.

(Mouse, PgDn, PgUp, Arrow =>Move), (ESC=>Exit)

The input fields which are marked * are values with a unit of quantity (V, A, Hz,...) or multiplication factors. The input fields with - are code values. These can be entered or selected via the Options

(ESC=>Exit)

Wires and steel

The input fields for Wire type (not wire size) and Steel are a minor exception in this instance and can be selected in addition to manual input via the Material/Wires/Femenu or selected by means of keys F11and F12.

(Alt-M and F or F11 only =>Fe-Quality), (Alt-M and W or F12 only =>Wires)

(TAB=>Move), (Click=>Mark), (Double click=>Select)

(TAB=>Move), (Click=>Mark), (Double click=>Select)

Core and bobbin unit

Using the menu option of Material/Coresor key F9, you can select a core with a given bobbin or set up your own preferred combination. The distinction is drawn between 4 different approaches for selection of the core and of the bobbin:

Automatic selection
(Selection = 0)
In this mode, you just know the core family for the core and the bobbin from which you have to choose. But you don’t know which core is suitable for your application.

• Enter a 0 in the Selectioninput field.
• The core name in the status line must be AUTO.

Core and bobbins are selected
(Selection = 1)
You wish to produce your application with a given core and a given bobbin from a given core family.

(Alt-M and C or just F9 =>Cores and Bobbins)

(TAB=>Move), (Click=>Mar), (Double click=>Select)

• Select the Material/Coresmenu option or press key F9.
• Select a core family.
• Use the mouse to click on the core you prefer.
• Click on the OK button. The Selectioninput field has automatically acquired the value of 1.

Core and bobbin are incorporated from a single input data file

(Selection = 2)

We have already selected an input data file before accessing the input mask, or we have loaded an input data file from the input mask via the Input/Open menu option. In this instance, we incorporated the core and bobbin stored in this input data file. The input field for Selection has a value of 2. Using this procedure, we have no further work to do with regard to core selection on-line.

(TAB=>Move), (Click=>Mark), (Double click=>Select)

The core and bobbin are manually entered

(Selection = 3)

You wish to achieve your application with a given core and a given bobbin, but the core does not exist in any core family.

(Numerical =>Input), (TAB, Mouse =>Move)

(Numerical=>Input), (TAB, Mouse=>Move)

• Select the Material/Cores menu option or press key F9.
• Select a core family which could include your core.
• Use the mouse to click on a core which is similar to yours.
• Use the mouse to click on the Copybutton and then Yes.
• Change the core, the bobbiand/orthe case.
• Click on the OK button. The Selection input field has automatically acquired the value of 3.

Under this procedure, we have no further work to do on-line with regard to core selection.

Saving the input data file

Your input is COMPLETE! It is recommended that you save your input data into an input file.

(Alt-I and S)

(TAB => Move), (Click => Mark), (Double click => Select)

• Select the Input/Save menu option
• Enter the name of your input data file (max.of 8 characters, and the extension .TK1 cannot be modified).
• Click on the OKbutton.

Run designing

Design is started via the Run/Start menu option or with key F4.

(Alt-R and S or just F4)

If you have not already selected a core, the program starts automatic search in accordance with one of your requirements from the core size as per your inputting, from the selected core data file.

The program starts searching at the first core of the core family and passes through to the last core in the family in sequence. You are invited to approve the first core which is adequately large for your application.

This is followed by the design operation. Note that there are 2 criteria of the optimizing: dT => temperature rise or dU => Regulation

Data page for winding

After the design procedure, a summary of the main results will appear on-screen.

(Mouse, control bar, Arrows, PgUp, PgDn=>Move)

The continuation of the above screen illustrates the extensive display of the design results. Each designed value is allocated with an appropriate explanatory text.

If you should need further information,please locate the cursor on the size value and press key F1.This activates on-line help.

(Mouse, PgDn, PgUp, Arrows=>Move), (ESC=>Exit)

Press Key "2" to jump to this screen

Press Key "3" to jamp to this screen

Press key "4" to jump to this screen.

Press key "5" to jump to this screen.

Press key "6" to jump to this screen.

Press key "7" to jump to this screen.

Press key "8" to jump to this screen.

Press key "9" to jump to this screen.

If you are not satisfied with the results of design, you can :

• Return to the input form via the Input/Current menu option or by means of key F2, and reconfigure the input data on-line
• Or pass to the test mode via the Input/Testmenu option or with keyF5.

Activate the Input/Test menu option or press key F5.

Test mode

(Alt-I and T or F5 only)

In the test mode you can test a designed transformer and manually change its parameters.

(Numerical =>Input), (TAB, Arrows, PgUp, PgDn, Mouse=>Moved)

The input fields with the white background can be modified. For instance, if you want to change the wire size you have to move the cursor to the wire number:

Click the menu option Material/Wires or press F12 to open the list with the wires.

This the current wire size

Select the wire size which you want and pres Alt-O or click OK

Re-design in the test mode is activated via the Run/Test menu option or by means of key F6.

(Alt-R and Tor F6 only)

Here is the result after the re-design.

Help in test mode

In order to get on-line help in the test mode place the cursor where you need help and press F1

Printing

The printing is performed via the Output/Print menu option or by means of key F8. After activation of the print process, the data, totalling approx 16kB (3 pages), is printed on your printer. You can too save the results of design on your PC and load them and print out later. The procedure for saving of the designed data looks like this:

Saving of results of design

Saving of the designed data which you can load and print out later on the data page for the winding,is activated via theOutput/Save menu option.

(Alt-A and S)

Enter a name for the output file in which the designed data is to be saved.

(TAB=>Move), (Click=>Mark), (Double click=>Select)

This completes your design.

Quitting your Rale Design Software for small transformers

Select the Input/exit menu option or press key Crtl-F12 and then click on the Yes button.

Important note:

In this context, we have just discussed the procedure for design of the small transformer. There is extensive coverage of the technical aspect of design, within the design examples.